The creme de la creme of combo weapons! A canoe paddle mixed with a chainsaw becomes the Paddlesaw! It was the absolute best weapon you could put together in the Case Zero prequel DLC. In the main...[See More]

I used an Xacto knife, painter's tape, and superglue to resculpt the Neutrona Wands, then used staples to form the wires and some clear acrylic tube to form the emitters. I used the same tools to...[See More]

mash-up between Kratos and He-Man. Kratos has defeated all the gods of the earth and is on his way to becoming the master of the universe!...[See More]

The multi munitions utilitarian terrain tracker is an original design I made up by taking to drones and gluing them together it kinda resembles to me like a bulldog the way the mech stance is hence...[See More]

Sankara Shrine build an artifact, some wax paper, aluminum foil, bubble wrap and a tea light. I saw a video on youtube from Scott's toybox where he used some aluminum foil to line the top part of the...[See More]

Ark of the Covenant Build an Artifact. Just a bit of wash applied to the art panels on the sides, handles and corners. I painted the rails with army painter slaughter red speed paint to add some...[See More]

It's not a figure custom - it's just an accessory. Year Released: 2020 I'm collecting Spider-Man series, but not fond of mass figures duplication. That's why I was not very interested in Spider-Man...[See More]

Ace and Titus the bat-hounds. Used 3D printed Dogs, painted with acrillics and sculpted some bits. Now the bat-family is completed....[See More]

From the horror movie Hereditary. The headless grandmother bowing to Paimon towards the end of the film. I sculpted this using casteline wax, and casted in resin....[See More]

Took a Signature Collection Bullseye and accessed interior by cutting the seam where the battery compartment lies. I added a bendable, metal frame after carefully severing the seams between the body...[See More]

Biollante is a Rose-Girl-Godzilla hybrid. Base is vinyl Bandai Biollante, the rest is sculpted. Has some articulation on the base of the vines and glow-in-the-dark paint for the eyes and her nucleus....[See More]

First I took a dowel stick then I took a hand sanitizer bottle then a took some cardboard and try cut out the shape of the wolf head several times then I tape them around the bottle. Next I attached...[See More]

Just a simple recipe of a TMNT Mini Bebop and fodder bits of Mega Bloks Halo figures. I just wanted to make my own vision of Pork Grind....[See More]

I made him using World Of Warcraft and Halo Mega Bloks figures and fodder bits. Apocalypse decided it was time for him to become far more powerful than he's ever been. In order to combat any...[See More]

I made him using Halo and World Of Warcraft Mega Bloks figures, and fodder bits. He was created by Bruce Banner and Odin and Beast, as the ultimate force for good. He's a transmutated Direwolf...[See More]

I made this custom using a mixture of Halo and World Of Warcraft Mega Bloks figures and fodder bits and original made pieces. He was created when Death decided she needed her own champion to...[See More]

Had a couple canvas boards laying around. And my brother said I should paint spawn. I thought well I've never done that....[See More]

First I took a leather glove trimmed off some of the bottom off then I weathered the glove with a mix of yellow a brown paint. Next I made the back plate and the finger pieces out of some coffee can...[See More]

I made some accessories for my Michael Myers figure I based them off of the trick or treat studios pack. First made the sheet out of a thin piece of material mark some eye holes and then I made Bob's...[See More]

Today is sword day :) . Here another sword I created earlier this year, the Excelsior sword. I only knew before the Excelsior zord, as I have his figure, I didn't know he was also a normal sized...[See More]

This is a custom accesory only, one of my few :) . Made for a friend of a collector's forum, which asked me if it was possible to do such a sword. I replied that yes, in theory, as I had the red...[See More]

After seeing doctor strange into the multiverse of madness I decided to make something significant to the good doctor the portal. First I traced a circle on a piece of thick cardboard then I drew the...[See More]

Decided to make a custom (Dirty) antique coin from resident evil 7: biohazard. This particular coin can be unlocked by completing the RE7 demo. The Dirty coin can be used to purchase weapons or...[See More]

My brother bought me the deluxe Hasbro Animatronic Grogu aka The Child. I removed his original outfit then handsewn a new outfit from scratch. I then used pastels and watercolor pencils to give his...[See More]

A few years ago I made a Frankenstein lab diorama which I was happy with the results but I wanted to update the table so this is what I did. I made a feature were I can elevated it, now I can have it...[See More]

3D modeled neck peg adapter for Super Saiyan 3 Goku SH Figuarts, made 2 versions, one for the 1.0 peg and another smaller one for 2.0 pegs. Made in Solidworks and 3D printed in Ender 3....[See More]

Here is my attempt at Slim from killer klowns. All his clothes is hand made, I used cos clay to make the hands and feet and the head is made from plastic resin. Took a bit longer than expected to...[See More]

This is one of those projects I started centuries ago, but had no idea what to do with after I did it (Plan your projects kids!) I based it off a T-Shirt that Pixel Dan was wearing during the...[See More]

The infamous "Sorry I'm Dead" "boss" from the NES game Monster Party. For years it was debated what it actually was... the manual calls it "Giant Spider" but that's certainly an error since it calls...[See More]

These are my Afro Samurai and Jinnosuke (Fight Scene Diorama) custom Funko Pops. Sculpted on a random Funko Pop bases with Aves Apoxie Sculpt and Super Sculpey firm. Hand painted with acrylic paint....[See More]